Providing exceptional battery solutions
to the Canadian marketplace.
Learn how East Penn’s patented technology and superior quality control processes have resulted in DEKA® becoming the #1 industrial battery brand for material handling equipment.
Click here to receive
your white paper >
With AH Accumulator
Used to provide detailed information about the battery to the charger control, these Battery Identification Modules are an invaluable addition to your motive power batteries. Using the charger control identification numbers, voltages, amp hour sizes, start rates and construction types can all be easily programmed into a BID module.
Additional information relating to the battery voltage, temperature and amp hour usage may be read on demand from the BID. Often this information is critical for warranty claims and service issues.
Temperature remains one of the biggest causes of shortened battery life. The BID, used in conjunction with a controlled output charger, will enable the charger control to provide the optimum temperature compensated charge profile (from 32° F to 158° F). In fact, a BID module is required for all opportunity or fast charge applications. With the elevated output currents of our opportunity/fast chargers, it is more important than ever to make sure you can carefully monitor your battery.
With its rugged construction, wide operating temperature and non-volatile memory, the BID will likely outlast the battery. All communication of data is completed through the use of standard charging cables and connectors, eliminating the need for any special wiring or SBX connectors.
Standard BID Kit Part Numbers:
194304-001 6-18 cells
194304-002 24 cells
194304-003 36 cells
194304-004 40 cells
The AH Accumulator BID continuously samples both charge and discharge current over 100 times each second, capturing and storing every AH of battery throughput, including fast transient truck controller regeneration currents. This AH data and the battery average temperature can be quickly retrieved from the Ultra Maxx or Equinox front panel display, allowing the user to gauge the remaining battery life and utilization. In both fast and opportunity charging scenarios, amp hour throughput information is vital for warranty purposes.
Additionally, when using the AH Accumulator, the charger control will also give access to the number of battery discharge cycles, based on the total discharge amp hours and 80% of the BID amp hour setting.
The Charge / Discharge Ratio is also available and is based on the ratio of the total charge amp hours over the total discharge amp hours.
Amp Hour Accumulator functions are available on the Ultra Maxx, Equinox, and Eclipse & Eclipse Plus controls.
BID/Amp Hour Accumulator Kit Part Numbers:
197348-001 6-18 cells
197348-002 24 cells
197348-003 36 cells
197348-004 40 cells
Kits come with acid absorber and neutraliser as well as safety wear, brush, pan, disposal bags, and full instructions. Purple to yellow colour change shows when acid is neutralized and safe.
510191-001 (Spill Kit)
510191-001 6-Gallon (22.7 litre) Battery Acid Spill Kit
Watering systems greatly simplify the watering of industrial batteries. Automatic shut-off valves interconnected with tubing replace existing vent caps. Once connected to a water supply, water flows into each cell until it reaches the correct level. A built-in flow indicator tells the operator when filling has been completed, and the entire process takes just 30 seconds per battery.
We provide full watering systems solutions from Flowrite
and Battery Watering Technologies. CALL FOR DETAILS.
Flip Top caps allow an operator to check specific gravity levels quickly and easily, without having to remove a watering system. These caps are available in multiple heights to accommodate the wide range of battery cell depths, and include features that direct condensation back into the cell and prevent the escape of battery acid onto battery tops. Flame/spark retardants minimize risk of explosion.
ACC-FTB Short Flip Top Vent Caps 17 Plate & Over
ACC-GFTB Tall Flip Top Vent Caps 15 Plate & Under
2000 Standard Height (0.955")
2000C Medium Height (1.275")
2000EX Extra Height (1.455")
We carry a selection of watering guns, hoses and carts.
Watering System Gun
Part Number: DF72ST
Manual Watering Gun
(not for use with watering systems)
Part Number: GMAN1
Flow-Rite Regulated Hose System 20 Feet
Part Number: BA-MS-320-20
Aqua Sub Cart (DC powered)
Part Number: NC5000PN
Aqua Sub Jr (DC powered)
Part Number: NC5250PM
Let your batteries tell you when they need water!
The technologically advanced i-Lite™ Sensor improves battery maintenance by alerting operators with the brightest L.E.D visual indication when it is time to water the batteries.
Easy to see and use
BCVA-2000 (Remote dash mounted)
To protect your equipment and extend the life of your batteries, these deionizer kits can easily and inexpensively remove harmful impurities from the water. Dissolved impurities in standard tap water will degrade batteries and decrease battery life and performance. Comes with an input and output hose. Connects to your choice of direct fill link, manual gun, or an approved competitor filling device.
PW-1800 (Battery Watering Technologies)
PS-300 (Philadelphia Scientific)
CLICK HERE TO CONTACT US....
Areas of interest:
BATTERIES & CHARGERS
BATTERY HANDLING EQUIPMENT
© COPYRIGHT 2017, EAST PENN CANADA.